SERIES UA+
UA+ Aluminum End Mill, 3 Flutes
Designation: UA+-3F
High-performance 3-flute geometry for aluminum and non-ferrous alloys with enlarged chip space.
HARDNESSFor non-ferrous metals
COATINGDLC / polished flute
GEOMETRY3 flutes, 50° helix, U-shaped flute, flat end
Key Features
—3 flutes, 50° helix, U-shaped flute, flat end
—The full size range is listed on catalog pages 005–006
—Standard items are stocked; non-standard versions are available on request
Recommended Workpiece Materials
Applications
Technical Parameters
CategoryHigh-performance Special End Mills
SeriesUA+
DesignationUA+-3F
Workpiece MaterialAluminum and non-ferrous alloys
HardnessFor non-ferrous metals
CoatingDLC / polished flute
Geometry3 flutes, 50° helix, U-shaped flute, flat end
DiameterØ10 mm · representative size
Cutting Length30 mm
Overall Length75 mm
Shank DiameterØ10 mm
Machining Parametersap ≤ 1.5D · ae ≤ 0.2D · vc 150 m/min · fz 0.015D
CatalogMingtaishun End Mills · 2026 Catalog
Catalog section005–006
Representative sizeØ10 × 30 × Ø10 × 75
Number of Flutes3
Helix Angle50°
Standard sizes45 · Ø1–Ø20 mm
The size range follows the 2026 catalog; non-standard versions are available on request.
Size range
- Helix Angle50°
- Flute profileU-shaped flute
- CoatingDLC
Per the 2026 catalog, pp. 005–006 · 45 standard sizes · PDF ↗ · Dimensions in mm
| Designation | DDiameter | LcCutting Length | dShank Diameter | LOverall Length | ZNumber of Flutes |
|---|---|---|---|---|---|
| 3*9*3*50*3T | 3 | 9 | 3 | 50 | 3 |
| 3*12*3*75*3T | 3 | 12 | 3 | 75 | 3 |
| 3*15*3*100*3T | 3 | 15 | 3 | 100 | 3 |
| 1*3*4*50*3T | 1 | 3 | 4 | 50 | 3 |
| 1.5*5*4*50*3T | 1.5 | 5 | 4 | 50 | 3 |
| 2*6*4*50*3T | 2 | 6 | 4 | 50 | 3 |
| 2.5*8*4*50*3T | 2.5 | 8 | 4 | 50 | 3 |
| 3*9*4*50*3T | 3 | 9 | 4 | 50 | 3 |
| 3.5*12*4*50*3T | 3.5 | 12 | 4 | 50 | 3 |
| 4*12*4*50*3T | 4 | 12 | 4 | 50 | 3 |
| 4*20*4*75*3T | 4 | 20 | 4 | 75 | 3 |
| 4*25*4*100*3T | 4 | 25 | 4 | 100 | 3 |
| 5*15*5*50*3T | 5 | 15 | 5 | 50 | 3 |
| 5*20*5*75*3T | 5 | 20 | 5 | 75 | 3 |
| 5*25*5*100*3T | 5 | 25 | 6 | 100 | 3 |
| 2*6*6*50*3T | 2 | 6 | 6 | 50 | 3 |
| 3*9*6*50*3T | 3 | 9 | 6 | 50 | 3 |
| 4*12*6*50*3T | 4 | 12 | 6 | 50 | 3 |
| 5*15*6*50*3T | 5 | 15 | 6 | 50 | 3 |
| 6*18*6*50*3T | 6 | 18 | 6 | 50 | 3 |
| 6*30*6*75*3T | 6 | 30 | 6 | 75 | 3 |
| 6*30*6*100*3T | 6 | 30 | 6 | 100 | 3 |
| 6*40*6*150*3T | 6 | 40 | 6 | 150 | 3 |
| 7*21*8*60*3T | 7 | 21 | 8 | 60 | 3 |
| 8*24*8*60*3T | 8 | 24 | 8 | 60 | 3 |
| 8*35*8*75*3T | 8 | 35 | 8 | 75 | 3 |
| 8*40*8*100*3T | 8 | 40 | 8 | 100 | 3 |
| 8*50*8*150*3T | 8 | 50 | 8 | 150 | 3 |
| 9*27*10*75*3T | 9 | 27 | 10 | 75 | 3 |
| 10*30*10*75*3T | 10 | 30 | 10 | 75 | 3 |
| 10*40*10*100*3T | 10 | 40 | 10 | 100 | 3 |
| 10*50*10*150*3T | 10 | 50 | 10 | 150 | 3 |
| 11*33*12*75*3T | 11 | 33 | 12 | 75 | 3 |
| 12*36*12*75*3T | 12 | 36 | 12 | 75 | 3 |
| 12*45*100*3T | 12 | 45 | 12 | 100 | 3 |
| 12*60*12*150*3T | 12 | 60 | 12 | 150 | 3 |
| 14*35*14*80*3T | 14 | 35 | 14 | 80 | 3 |
| 14*45*14*100*3T | 14 | 45 | 14 | 100 | 3 |
| 14*65*14*150*3T | 14 | 65 | 14 | 150 | 3 |
| 16*45*16*100*3T | 16 | 45 | 16 | 100 | 3 |
| 16*65*16*150*3T | 16 | 65 | 16 | 150 | 3 |
| 18*45*18*100*3T | 18 | 45 | 18 | 100 | 3 |
| 18*70*18*150*3T | 18 | 70 | 18 | 150 | 3 |
| 20*45*20*100*3T | 20 | 45 | 20 | 100 | 3 |
| 20*70*20*150*3T | 20 | 70 | 20 | 150 | 3 |
The table scrolls horizontally and vertically
For a few catalog positions the designation and the dimension columns disagree; the table uses the dimension cells: 5*25*5*100*3T, 12*45*100*3T
